Primary Secondary Fine Crushing Impact Rock Crusher For Sale

Quick Details

Impact Rock Crusher uses impact energy to crush the materials. The rotor rotates at a high speed under the driving force of the motor. The materials entering from the inlet impact the plate hammer on the rotor and would be crushed under the high-speed impact of the plate hammer. The crushed materials would be thrown back to the liner plate for crushing again. Finally, the materials are discharged from the outlet of PF Impact Crusher.

Working Principle

An electrical motor drives through V-belts and makes the rotor run at high speed. Materials will be fed into the crushing chamber from feed inlet, and be struck by the plate hammer which rotates at high speed. The materials are thrown up to the dentate reaction plate on the top of the crushing chamber and then falls down, the thrown-up and falling-down materials are crushed by striking with each other. The big incompletely crushed materials will form big stress and bending force at the interaction of hammer and thick impact plate in P crushing chamber, even the hard crushed materials will be broken and enter into the following S and T crushing chamber. The materials in these two crushing chambers can be medium and fine crushed by striking, impacting, bending and extruding, then discharged out of the machine.

Structure

Parameters

Remark: The production capacity listed in the table is based on limestone with the loose density 1.6/m³. The feed should be moderate. If the feed is too big, it will reduce the capacity and increase the wear.

Features

1. Especially designed three crushing chambers, which improves the production capacity of PFQ impact crusher, makes the feed size bigger and the product shape better.

2. The optimally designed rotor provides powerful rotational inertia and strong impact force of hammer head, which improves the productivity and increases the crushing ratio.

3. Especially designed anti-wear alloy C shape hammer keeps the shape of impact face in product life cycle. It ensures that the product shape and particle size distribution is very stable.

4. Standard modular designed liner and tooth impact plate of PFQ impact crusher have common-ability and interchangeability, which improve the utilization ratio and prolong the service life of PFQ impact crusher.

5. Special hammer fitting structure improves hammers' stability and convenient dismounting, it also greatly improve the work efficiency.

6. The discharging opening size of the machine can be adjusted according to the requirement of product size and particle size distribution.

7. The standard hydraulic lifting device will be provided with the machine. It is optional to supply special lifting tools for replacing hammers, which is flexible and can be easily maintained.

Application

1. For Limestone, feldspar, calcite, talc, barite, dolomite, kaolin, gypsum, graphite, etc.

2. Common final output size:0-10mm, 10-20mm, 20-30mm, 30-40mm, etc.

3. Hot sale capacity:60-100t/h, 150-200t/h, 200-300t/h, 300-400t/h, etc.

★Impact crusher adopts new manufacturing technology and structural design, and the finished product is cubic, free of tension and cracks, with excellent final particle shape.