1. Stone Crusher Introduction
1) Different kinds of crusher to choose, hammer crusher, jaw crusher, impact crusher, cone crusher, etc.
2) High capcity, high crushing ratio, 3-300 t/h.
3) Uniform particle size, simple structure
4) Low investment, easy operation and maintenance.
5) Applied to industries of metallurgy, mining, chemistry, cement, construction, refractory materials, ceramics
6) Can crush hard and soft ores into medium or small size, such as barite, limestone, gypsum, terrazzo, coal, slag, and up to 100 different kinds.
2. Stone Crusher-Hammer Crusher
Hammer crusher is equipment using high-speed rotary hammers to crush materials, mainly applied to the industries of metallurgy, mining, chemistry, cement, construction, refractory materials and ceramics. It can crush hard and soft ores into medium or small size, such as barite, limestone, gypsum, terrazzo, coal, slag, and up to 100 different kinds.
Stone Crusher Machine-Hammer Crusher Working Pinciple
Hammer crusher mainly consists of frame, rotor, support iron and grate bars. The frame is divided into two parts: Upper part and lower part which are welded by steel plates after being cut. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of the turn plate, pin shafts, and hammers which are grouped regularly in the main shaft. The motor drives the rotors to rotate quickly in the crushing cavity, and hammers spread outward as a result of centrifugal force from the rotation of the rotors. Large materials entering the crusher through the feed inlet are stricken, impacted, cut and ground by the high-speed hammers to small size. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement.
3. Stone Crusher Machine-Jaw Crusher
Jaw Crusher is mainly used to crush kinds of mining stones primarily and the largest compression resistance of the material to be crushed is 320Mpa. The jaw crusher is widely used in mining, metallurgical industry, building material, highway, railway and chemical industry. This machine can break materials into medium size and fine size.
Stone Crusher Machine-Jaw Crusher Working Principle
Jaw crusher mainly consists of frame, eccentric shaft, jaw plate, connecting bar, adjustment part and spring. The movable jaw goes upward and downward through eccentric shaft when belt and belt wheel are driven by the motor. The angle between movable jaw and bracket turns big when the movable jaw goes upward, which pushes the movable jaw plate to come closely to fixed jaw plate. At the same time, materials are crushed with the movement of the movable jaw. When the movable jaw goes downward, the angle between movable jaw and bracket turns small. Under the force of spring and connecting bars, the movable jaw plate leaves fixed jaw plate, and the crushed materials with qualified size are discharged from the crushing cavity. With the continuous rotation of the motor, the movable jaw crushes and discharges materials, which, in turn, realizes the goal of mass production.
Stone Crusher Machine-Jaw Crusher Technical Tata
Model |
Feed Opening(mm) |
Max.feeding (mm) |
Discharge |
capacity(t/h) |
Rotation speed (r/min) |
power |
Weight |
Dimensions |
PE-150×250 |
150×250 |
125 |
10-40 |
1-3 |
250 |
5.5 |
0.8 |
720×660×850 |
PE-200×300 |
200×300 |
180 |
15-50 |
2-6 |
260 |
7.5 |
1.2 |
910×750×990 |
PE-200×350 |
200×350 |
180 |
18-70 |
3-10 |
260 |
11 |
1.5 |
1000×870×990 |
PE-250×400 |
250×400 |
210 |
20-60 |
5-20 |
300 |
15 |
2.8 |
1300×1090×1270 |
PE-400×600 |
400×600 |
340 |
40-100 |
16-60 |
275 |
30 |
7 |
1730×1730×1630 |
PE-500×750 |
500×750 |
425 |
50-100 |
40-110 |
275 |
55 |
12 |
1980×2080×1870 |
PE-600×750 |
600×750 |
500 |
150-200 |
80-240 |
275 |
55 |
15.8 |
2070×2000×1920 |
PE-600×900 |
600×900 |
500 |
65-160 |
50-180 |
250 |
55 |
17 |
2190×2206×2300 |
PE-750×1060 |
750×1060 |
630 |
80-140 |
110-320 |
250 |
110 |
29 |
2660×2430×2800 |
PE-800×1060 |
800×1060 |
640 |
130-190 |
130-330 |
250 |
110 |
29.8 |
2710×2430×2800 |
PE-830×1060 |
830×1060 |
650 |
160-220 |
150-336 |
250 |
110 |
30.7 |
2740×2430×2800 |
PE-870×1060 |
870×1060 |
660 |
200-260 |
190-336 |
250 |
110 |
31.5 |
2810×2430×2800 |
PE-900×1060 |
900×1060 |
685 |
230-290 |
230-390 |
250 |
110 |
33 |
2870×2420×2940 |
PE-900×1200 |
900×1200 |
750 |
95-165 |
220-450 |
200 |
110 |
52 |
3380×2870×3330 |
PE-1000×1200 |
1000×1200 |
850 |
195-265 |
315-500 |
200 |
110 |
55 |
3480×2876×3330 |
PE-1200×1500 |
1200×1500 |
1020 |
150-350 |
400-800 |
180 |
160-220 |
100.9 |
4200×3300×3500 |
PE-1500×1800 |
1500×1800 |
1200 |
220-350 |
500-1000 |
180 |
280-355 |
122 |
5160×3660×4248 |
4. Other Kinds of Stone Crusher Machine
We have many other kinds of stone crusher machine to meet your specific demands. Roller crusher, cone crusher, impact crusher, European Version Crusher to meet your first cruhing, sencond crushing, coarse crushing and fine crushing needs.
Company Brief Introduction
SHANGHAI CLIRIK MACHINERY CO., LTD located in PUDONG New district of Shanghai china, as a pioneer enterprise, which is specializing in research, manufacture and sales of all kinds of grinding mill and crushing equipment , from coarse grinding mill, fine grinding mill and ultra fine grinding mill, grinding mill related equipment , such as powder modifying machine, powder packing machine.powder conveying system, etc. We have devoted into grinding field for more than 30 years , we belive only focus can be professional .
Our company has already formed a full set of modern production line, equipped with intelligent, standardized testing and controlling laboratories, owned a professional team for R&D, production, sales and service.
Our factory
Customer Visit
Our markets
Our Certificates
Our company has get ISO9001, our products have recieved CE certification and other qualifications.
1. Seaworthy packing with sheet, fixed box, etc.
2. Container Loading
3. Delivery time: 15 days after receiving deposit.
4. All payment terms are available.
Pre-sales Service:
Based on the principle of constant innovation and quality guarantee, customer foremost, we are able to provide our customers not only the highest quality products at the most favorable price but also the most reasonable solution, such as the selection of the equipment, optimized process configuration and a full range of technical support.Every customer has the chance to visit the working machinein the site before placing the order,we help to arrange cars, hotels, and translators for every visiting customer.
After-sales Service:
Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the calcium carbonate powder site to help install the customers' plants. Necessary training about machinedaily maintenance to local workers is provided also.
Other products we can provide:
Welcome to Clirik !
Our factory is just 10 minutes far away from Pudong International Airport. We can pick you up from the airport.
Thank you for your patient reading!
Any needs and technical problems, contact us freely. We are more than glad to help. Our engineer will design a best solution drawing for you !